Kaifeng Chuangxin Measurement & Control Instrument Co., Ltd.
Tipo de Negocio:Fabricante , Compañía de comercio
Principales Mercados: África , Américas , Asia , caribe , Europa del este , medio Este , norte de Europa , Oceanía , Otros Mercados
Exportador:1% - 10%
certs:ISO14001, ISO9001, CE, Test Report
Descripción:Medidor de flujo electromagnético digital,Medidor de flujo magnético de acero inoxidable integrado,Medero de flujo electromagnético líquido DN100
Tipo de Pago:L/C,T/T,D/A,D/P,Paypal
Incoterm:FOB,CFR,CIF,EXW,FCA,DDP,DDU
Cantidad de pedido mínima:1 Set/Sets
transporte:Land,Ocean,Air,Express
Hafen:Shanghai,Qingdao,Tianjin
$285-528 /Set/Sets
Modelo: CXLD-Stainless steel
Marca: KCMC
Lugar De Origen: porcelana
Método De Visualización: Analógico y digital
Material: Stainless Steel
Pressure: 1.6/2.5/4.2Mpa
Lining: PTFE/Neoprene
Electrode: 316L/HC/HB/Ti/Tan/Pt-Ir Alloy
Paquete: Cartón de papel o caja de madera contrachapada
productividad: 50 set weekly
transporte: Land,Ocean,Air,Express
Lugar de origen: Porcelana
Apoyo sobre: 50 sets weekly
Certificados : ISO9001:2015
HS-Code: 9026100
Hafen: Shanghai,Qingdao,Tianjin
Tipo de Pago: L/C,T/T,D/A,D/P,Paypal
Incoterm: FOB,CFR,CIF,EXW,FCA,DDP,DDU
Materiales de flujo electromagnético de acero inoxidable entero se refieren a toda la casa y el tubo de medición usan acero inoxidable y no necesitan pintar afuera, el agujero W Materiales de acero inoxidable El medidor de flujo electromagnético es un medidor de flujo electromagnético a prueba de explosión y anti-corrosión.
El parámetro técnico del medidor de flujo electromagnético de acero inoxidable entero es como el flollwing:
Lining and nominal diameter DN(mm) : (special specifications can be customized) | PTFE lining:10,15,20,25,32,40,50,65,80,100,125,150,200,250,300,350,400,450,500,600 |
Rubber lining: 80,100,125,150,200,250,300,350,400,450,500,600,800,1000, 1200, 1400, 160 | |
Measurement error | ± 0.5% |
Temperature of measured medium | rubber lining -20℃~ + 80℃, PTFE -20℃ ~ + 180℃ |
Ambient temperature | -25~ + 60 ℃ |
Relative humidity | 5%~95% |
Rated pressure | DN10~65: 4.0MPa; DN80-150:1.6MPa ; DN200-600:1.0MPa |
Flow rate range | 0.1~15m/s |
Conductivity | The conductivity of the measured fluid is not less than 5μs /cm |
Output signal and load resistance | 0~10mA, 0~1000 Ω; 4~20mA, 0~500 Ω |
Electrode material | 316L, Ti, Ta, HB, Pt |
Protection level | Standard IP65, IP67, and optional IP68 |
Straight pipe length: upstream | ≥ 5DN, downstream ≥ 2DN |
Connection | flange connection, thread connection, clamp connection |
Power supply | 90~260AC ± 10%,50Hz ± 5% |
Power consumption | below 20W |